FÖRGASARE EDELBROCK 650 "AVS 2"
Artikelnummer: 710-1905
Pris:
5 830,00 med moms
4 664,00 utan moms
I lager: Ja
THUNDER AVS 2 MANUELL CHOKE
STRIP-KIT SE 710-1948
The Edelbrock #1905 AVS2 Series 650 cfm carburetor is the next
generation in Edelbrock carburetors. Designed and calibrated for
optimum street performance in small-block and some big-block engines.
The AVS2 features annular flow primary boosters with a new calibration
for improved off idle and cruising performance.
The annular flow booster design delivers improved fuel atomization
to eliminate flat spots that may be encountered when the carburetor
transitions from idle to full throttle.
Each annular flow booster features eight, equally spaced orifices to
improve fuel metering from idle to the main circuit.
The improved flow metering makes this carburetor ideal for use with
a wide variety of small-block and big-block engines with either
dual- or single-plane intake manifolds.
The Edelbrock #1905 AVS2 includes both timed and full vacuum ports for
ignition advance. It comes with:
Metering Jets Primary .101, Secondary .098;
Metering Rods .070 x .037; Step-Up Spring orange (5" Hg).
Use our Carburetor Stud Kits #8008 or #8024 if needed.
Match with a variety of manifolds that include Edelbrock Performer,
Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands
of similar design.
INSTALLATION NOTES:
Manual choke AVS2 Carbs cannot be converted to electric choke
Thunder Series AVS2 Carbs Edelbrock carburetors are not calibrated
for or compatible with alcohol, race or E85 pump fuel.
The use of alcohol or E85 in your Edelbrock carburetor will damage
your carburetor and void your warranty.
the use of a new fuel filter between the fuel pump and carburetor
is required. Failure to do so will void the manufacturer’s warranty
of the carburetor. You must use Edelbrock Adapter #2732 when installing
a Performer Series carburetor on certain Edelbrock intake manifolds
The Edelbrock #1905 AVS2 Series 650 cfm carburetor is the next
generation in Edelbrock carburetors. Designed and calibrated for
optimum street performance in small-block and some big-block engines.
The AVS2 features annular flow primary boosters with a new calibration
for improved off idle and cruising performance.
The annular flow booster design delivers improved fuel atomization
to eliminate flat spots that may be encountered when the carburetor
transitions from idle to full throttle.
Each annular flow booster features eight, equally spaced orifices to
improve fuel metering from idle to the main circuit.
The improved flow metering makes this carburetor ideal for use with
a wide variety of small-block and big-block engines with either
dual- or single-plane intake manifolds.
The Edelbrock #1905 AVS2 includes both timed and full vacuum ports for
ignition advance. It comes with:
Metering Jets Primary .101, Secondary .098;
Metering Rods .070 x .037; Step-Up Spring orange (5" Hg).
Use our Carburetor Stud Kits #8008 or #8024 if needed.
Match with a variety of manifolds that include Edelbrock Performer,
Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands
of similar design.
INSTALLATION NOTES:
Manual choke AVS2 Carbs cannot be converted to electric choke
Thunder Series AVS2 Carbs Edelbrock carburetors are not calibrated
for or compatible with alcohol, race or E85 pump fuel.
The use of alcohol or E85 in your Edelbrock carburetor will damage
your carburetor and void your warranty.
the use of a new fuel filter between the fuel pump and carburetor
is required. Failure to do so will void the manufacturer’s warranty
of the carburetor. You must use Edelbrock Adapter #2732 when installing
a Performer Series carburetor on certain Edelbrock intake manifolds
EDELBROCK, 1405, 1406, 1805, 1905, 9905, 9906, EDE1405, EDE1406, EDE1805, EDE1905, EDE9905, EDE9906, EDL1905, 710-1905, , , , , , , , , , ,